|
Width: Continuous forms are usually manufactured
in any width between 5" and 19".
Depth: Continuous forms are limited to
specific depths, usually between 1 3/4" up to 24".
Common Sizes (Overall size including stubs)
Sizes on a 14" Press:
Sizes on a 17" Press:
Sizes on a 22" Press:
Sizes on a 24" Press:
|
Note: Continuous forms can
be many other non-standard sizes. Consult with the supplier as to
their ability to provide other widths and depths that are not considered
standard.
|
Continuous forms are manufactured wider than the finished size of the form to
accommodate the need for lineholes. After the form has been through the printer,
the lineholes are handled in the following ways:
- They are removed in a machine that slits off the left and right sides of
the form, which brings the form down to the desired finished size.
- A perforation is added to the left and right sides of the form during the
manufacturing process. The perforations are usually 1/2" in from the
left and right edges of the form so that the user can easily remove these
stubs after the form has gone through the printer.
- On some applications, the lineholes remain on the form.
Back to Top
| 
